What motor?

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
pgudat
Member
Posts: 3
Joined: Thu Apr 23, 2009 6:00 pm

What motor?

Post by pgudat »

I picked up a 53 M38A1 and it appears that the motor might be not original. I cant get clear info on the block and some bits don't line up.

I can't perfectly identify the cab and the fuel pump is not orig to the M. Any thoughts? Can I identify the motor another way? The fuel pump is garbage and I'm cleaning the carb now and need a kit.

Carb
Image
Engine Left
Image
Engine Right
Image

Patrick
User avatar
TomM
Moderator
Moderator
Posts: 458
Joined: Sun Apr 17, 2005 6:00 pm
Location: Rhode Island

block

Post by TomM »

what is the casting number on the block located below the distributor?
what is the serial number stamped on the flat over the water pump.
with these two numbers someone on the list should be able to narrow down what you have.
User avatar
pgudat
Member
Posts: 3
Joined: Thu Apr 23, 2009 6:00 pm

Re: block

Post by pgudat »

I can't get the serial number. I cleaned the paint off and I can only see a couple of characters faintly.

Here's a pick of the casting number. Any assistance is greatly appreciated!


Image
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16471
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

It's a 1953 or newer F134 used in M38A1, M170, Pickups, Wagons.

The serial may be very difficult to read. It will take a very strong light aimed at it from the side while you view it with a magnifying glass. The water outlet is a real pain but with practice you can read them quite well. Clean thoroughly with brake cleaner and a scotchbrite pad.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
Post Reply