Hi Guys,
My M38a1 breathed its first breath on Wed evening. It ran great but none of the electric gauges worked but thats something i can look into later. Thanks for all the help and advice that I have gotten here. This is a great place to learn.
Regards,
Paul
It's alive!
-
PaulK
- Member
- Posts: 37
- Joined: Fri Jun 01, 2007 6:00 pm
-
wesk
- Site Administrator
- Posts: 16471
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
Great news Paul.
Unplug the instrument spider from the #27 feed wire that comes from the ignition switch. Turn the switch on and check the #27 wire pin for power with a gage or a test light. It's odd for none of the gages to work so I'm guessing the power is not there.
Unplug the instrument spider from the #27 feed wire that comes from the ignition switch. Turn the switch on and check the #27 wire pin for power with a gage or a test light. It's odd for none of the gages to work so I'm guessing the power is not there.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php