I can really use some help putting my m38 back together. can anyone post a picture of the oil pressure sending unit and how it is mouted to the block. I also need a picture of the oil bath filter mounting to the firewall.
Thanks,
Dave
pictures needed - HELP ?????
Moderators: TomM, Moderator, wesk
-
m37m38
- Member
- Posts: 52
- Joined: Tue May 10, 2005 6:00 pm
- Location: Tucson, AZ
-
Ryan_Miller
- Site Administrator
- Posts: 1668
- Joined: Sat Apr 02, 2005 6:00 pm
- Location: Kansas
Dave,
A photo of the oil pressure sending unit mounting on the engine block is located in the manuals:
ORD 9 SNL G-740 page 11 figure 01-1
Lower right of the engine block just in front of the bell housing and just above the oil pan.
I can't find a good photo of the two brackets that mount to the firewall that the air cleaner attaches to. I know I have one somewhere!
I hope this helps.
A photo of the oil pressure sending unit mounting on the engine block is located in the manuals:
ORD 9 SNL G-740 page 11 figure 01-1
Lower right of the engine block just in front of the bell housing and just above the oil pan.
I can't find a good photo of the two brackets that mount to the firewall that the air cleaner attaches to. I know I have one somewhere!
I hope this helps.
Ryan Miller
MVPA # 22010
MVPA # 22010