M38 Passenger Seat Bracket

sonny · Post by **sonny** » Mon Aug 31, 2009 7:52 pm

The tilting passenger seat on my M38 does not have an outboard bracket on the bottom of the seat frame to rest on when in the upright position. Anyone have a photo of what the bracket looks like and where it is positioned or attached - don't see any holes where one might have been. My block of wood works well but doesn't have that "original look." Thanks

Post by **wesk** » Mon Aug 31, 2009 11:28 pm

If the seat is not bent and the right rear wheel house is completely stock then the seat will rest on the small ledge on the wheel house.

sonny · Post by **sonny** » Tue Sep 01, 2009 7:07 am

Thanks Wes - my bracket is in place but it appears that the inboard support has been replaced and holds the seat too high to reach the outboard wheel well bracket - should be an easy fix