Fuel Pump question....yes, again...

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
idiocrates
Jeep Enthusiast
Jeep Enthusiast
Posts: 437
Joined: Thu Nov 01, 2007 6:00 pm
Location: Seguin, Texas

Fuel Pump question....yes, again...

Post by idiocrates »

Just a quick fast question.......are there any differences between the mechanical fuel pump for an L-head engine and the mechanical fuel pump for an F-head engine? If I'm opting to install electric wipers and want to replace my old fuel pump with a new single action (fuel pump only) and the description of the new fuel pump says its for the L-head engine.....will it fit the F-head too.....and work properly relative to fuel pressure and volume? Thanks.
Jim

***********************
'?? - M38A-1
User avatar
Zane
Active Member
Active Member
Posts: 158
Joined: Sat Jun 30, 2007 6:00 pm

Post by Zane »

yes , same block (basically), same crank shaft, 100% interchangeable, just make sure if its a pump you need a spacer for you use one.
User avatar
idiocrates
Jeep Enthusiast
Jeep Enthusiast
Posts: 437
Joined: Thu Nov 01, 2007 6:00 pm
Location: Seguin, Texas

Post by idiocrates »

Thanks for the reply.....now my only question is.....How does one know whether or not the pump need a spacer or not? Is there some magical length of acctuating arm that needs to be sticking out?
Jim

***********************
'?? - M38A-1
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16469
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

If the pump you choose to use had needed a spacer on the engine it was originally specified for then you will usually need that engine's spacer. The spacers come in several thicknesses.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
Post Reply