Stuck shifter.

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
CliffM38Experiment
Member
Posts: 7
Joined: Sun Jun 20, 2010 6:00 pm
Location: Bethany, OK

Stuck shifter.

Post by CliffM38Experiment »

My 51 M38 stick shift is stuck. Any advise on things to check or do before I rip into it?
User avatar
Jim
Active Member
Active Member
Posts: 196
Joined: Wed Apr 13, 2005 6:00 pm
Location: Van Buren, Arkansas
Contact:

Post by Jim »

Jack up one side of the rear and front axles (with
jack stands, block the other wheels) and try to rotate
the wheels. That might free up the innards of the
transmission.

Jim in Darkest Arkansas
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16469
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

With the transfer in neutral and the clutch in and still can't budge stick then it time to remove the 6 bolts on the lid and lift her off. Look for worn forks, loose parts and two gear ranges engaged at the same time.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
CliffM38Experiment
Member
Posts: 7
Joined: Sun Jun 20, 2010 6:00 pm
Location: Bethany, OK

Post by CliffM38Experiment »

Thanks Wes. My wife tells me we are going to the lake this weekend, so I guess I'll plan for that removal next weekend. Why is she calling the Jeep my new wife? :)
User avatar
CliffM38Experiment
Member
Posts: 7
Joined: Sun Jun 20, 2010 6:00 pm
Location: Bethany, OK

Post by CliffM38Experiment »

Hey Wes, One more thing.

Why is the cover held on by that knob looking part on the top left hole, and is it possible to get it back on if I remove it, without a major undertaking?
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16469
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

Are we mixing up covers?

There are three covers on the way to the tranny's top cast cover.

Image
First to remove has the round foot rest knob installed in it.
Image


Image
2nd to remove. This one has the kick start pedal which comes with. And the small round panel on the left attached to it.
Image

Image
Third panel to remove. Has the cover with gasket for the transfer canes attached to it.

Image
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
CliffM38Experiment
Member
Posts: 7
Joined: Sun Jun 20, 2010 6:00 pm
Location: Bethany, OK

Post by CliffM38Experiment »

Wes,

Thank you very much for the pics. I was talking about that food rest. I see, because of your pics, exactly what you are talking about. I will get into it. I sincerely appreciate the advise.

Cliff
Post Reply