Where can you find these? I called around to a few different places in Supply Line with no luck. I've got a cable for an M416, but I want it to be right. My M100 has the receptacle mounted on the trailer. Also, can you still get the drain plug bracket? I remember a few years back you could, but forgot who had them.
Thanks - Matt
Double ended intervehicular cable
-
wilfreeman
- Member
- Posts: 1079
- Joined: Sun Mar 12, 2006 6:00 pm
- Location: Richburg, SC
- Contact:
Intervehicular Cable
Matt,
I have seen the ends for the cables (both the shell and the plug) at Saturn Surplus. If you get them, you could make your own, if you were also able to get some cable (LS7SGU-4 or equivalent -- that's a 7 conductor, 14 AWG marine cable, unatmored, with silicon-glass impregnated insulation). It is pretty flexible, and not too expensive. You might check out Midwest Military for the plug brackets. John seems to have just about EVERYTHING, and knows where to get what he doesn't.
Good Luck
Sam
I have seen the ends for the cables (both the shell and the plug) at Saturn Surplus. If you get them, you could make your own, if you were also able to get some cable (LS7SGU-4 or equivalent -- that's a 7 conductor, 14 AWG marine cable, unatmored, with silicon-glass impregnated insulation). It is pretty flexible, and not too expensive. You might check out Midwest Military for the plug brackets. John seems to have just about EVERYTHING, and knows where to get what he doesn't.
Good Luck
Sam
I SWEAR it said Tab A went into Slot B!
1952 M38A1, 1951 M100
1952 M38A1, 1951 M100
-
OKCM38CDN
I bought a cable with one end on it off ebay and then bought another end and made my own... real easy to do...
You can just buy a replacement cable from Saturn and buy another end and there you go... I believe the coonecots on the jeep are males (Pins sticking out) and the cable needs two females... They use pins A thru G straight thru
Hope this helps
You can just buy a replacement cable from Saturn and buy another end and there you go... I believe the coonecots on the jeep are males (Pins sticking out) and the cable needs two females... They use pins A thru G straight thru
Hope this helps
According the parts list the cable uses a different plug parts on each end. Saturn use to stock both plugs assemblies. The rubber housing and door are the same.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
-
OKCM38CDN
-
wilfreeman
- Member
- Posts: 1079
- Joined: Sun Mar 12, 2006 6:00 pm
- Location: Richburg, SC
- Contact:
Thanks Guys!
I checked Saturn Surplus's site - looks like $38.50 for a replacement cable (aren't the M100 cables longer than the 60" M416? The 72" cables are the same price), and $38 for the plug kit - a little pricey, but at least it will be correct! Anybody have a source for the drain plug bracket?
Thanks - Matt
I checked Saturn Surplus's site - looks like $38.50 for a replacement cable (aren't the M100 cables longer than the 60" M416? The 72" cables are the same price), and $38 for the plug kit - a little pricey, but at least it will be correct! Anybody have a source for the drain plug bracket?
Thanks - Matt
