Straps

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
GPA
Active Member
Active Member
Posts: 216
Joined: Wed Aug 06, 2008 6:00 pm
Location: Hungary
Contact:

Straps

Post by GPA »

Hi,
Ordered some straps for M38A1 to hold down the axe and the top bows at the sides, but I am not sure if the right ones arrived. Please, post some pictures and/or measurements of the uninstalled straps for each application.
Thanks,
Zoli
User avatar
Jim
Active Member
Active Member
Posts: 196
Joined: Wed Apr 13, 2005 6:00 pm
Location: Van Buren, Arkansas
Contact:

Post by Jim »

We have an M38. The straps we got from Midwest
Military had little loops under the buckle end which
I think go on the footman loops, and you have to
unscrew the footman loops for this. I used the long
ones (2 each side) on the back wheel wells to hold
various canvas things, and a short one on the front
of the grill for the hood hold-down. Hope this helps.

Jim in Darkest Arkansas
User avatar
Jim
Active Member
Active Member
Posts: 196
Joined: Wed Apr 13, 2005 6:00 pm
Location: Van Buren, Arkansas
Contact:

Post by Jim »

Oops, forgot the two at the extreme rear of the
wheel well, with the footman loop mounted on
the flat, not on the side, a short strap goes there
with the loose end through the vertical metal
piece to tie down the top's frame.


Jim in Darkest Arkansas
User avatar
GPA
Active Member
Active Member
Posts: 216
Joined: Wed Aug 06, 2008 6:00 pm
Location: Hungary
Contact:

Post by GPA »

Thanks Jim, I will try to hook up those straps, hope I will do it correctly. I am missing two footman loops, have to get some of those too.
Post Reply