Paper filter for M38

jeepers52 · Post by **jeepers52** » Wed Oct 27, 2010 11:49 pm

I am sure this question has been asked, but I could not find it in the forums. I would love to get rid of the oil in the oil bath filter, on my M38. Is there a way to convert to paper element, and if so what is the best way to go? I see there are conversion kits for the MB, but I understand it can be done for a reasonable price. Any suggestions? Thank you

Post by **wesk** » Thu Oct 28, 2010 1:35 am

You only had to look half way down the index page:

http://www.willysmjeeps.com/v2/modules. ... pic&t=4451

RICKG · Post by **RICKG** » Thu Oct 28, 2010 7:21 am

jeepers, send me a pm if you need more info-rick g

Keith · Post by **Keith** » Mon Nov 01, 2010 7:40 am

On that old post showing the two different ways of putting a papper filter in the m38, there was a picture of a fram filter that looked to fit much easier. I went to the local parts store with that FRAM part # CA2663A and no luck, its a bad # or not offered here in the states.

Does anyone have the correct part #?

Thanks
Keith

Post by **wesk** » Mon Nov 01, 2010 7:57 am

Yep, that's a European number:
http://www.sogefifilterdivision.com/cat ... AM&lang=GB

nepperjepper · Post by **nepperjepper** » Mon Nov 01, 2010 2:20 pm

WIX Filters Air Filter Element # 46230

Fram # ca3565

stp # af116 filter at autozone

Jeff

Keith · Post by **Keith** » Tue Nov 02, 2010 5:52 am

Thanks for all the info, always a pleasure.

Keith
1951 M38