CRAZY QUESTION

COPPER · Post by **COPPER** » Sun Jan 09, 2011 3:56 pm

I have a 1952 M38 with a L-134 engine it started smoking real bad remove plugs an found #4 real wet. remove plug wire an ran out as good as any .how safe is it to run on three cylinders .it has a 24 volt system

Post by **wesk** » Sun Jan 09, 2011 9:08 pm

It is hard on the crank bearings due to the uneven loading. Try installing a non-fowling plug adapter on that bad cylinder or go to a hotter plug in that cylinder.

COPPER · Post by **COPPER** » Mon Jan 10, 2011 6:58 pm

wes were can i get that type plug an adapter