M38A1 CDN3 wheel cylinders

[major519]

The Canadian jeep has upgraded 10" drums and unusual sized wheel cylinders-
The fronts are 1-1/8" and the rears are 13/16"
I was checking mine out today and it appears that I may not be able to re-use my fronts, they were seized up. I pulled them apart and may be able to hone them as the rubbers are really good.
The casting is a Wagner-Lockheed FD-36825
I think that this is an old outdated cylinder and was wondering if anyone has a modern cross reference???

[jasonm]

Just take the number and go to canadian tire , thats all i did they were ordered and i had them in two days,they were around 30.00 each.
You can do it also at napa, but there prices are realy out there.

[captw]

Chris, you should be able to get whatever from NAPA...I got new cups and dust boots from a fellow Firefighter, who's a local NAPA manager...Wilf...p.s. see you at the OMVA show on 6/25/11

[C15TA]

Hi Chris
I put new ones in my CDN3 a while ago. I put the old cores back in the box and stuck them on a shelf someplace. I will look on Saturday and see if I can get those numbers for you. As others have said they are readily available. Please put aside 2 OMVA shirts for me in XL. I need them for Dirk and Stefan in Holland.
Cheers,
Barry

[major519]

If one of you fellow can get me some modern numbers that would be great. Trust me, I am a hound for these type of searches and all the morons that work at Partsource, Cdn Tire etc are really trying my patience.
I tried Napa and was suprised they couldn't help me, maybe I had a new guy...

[jasonm]

Lol Did napa try to tell ya these are american part numbers...lol They tryed that with me.
So i asked him what napa stands for he dident know,North American Auto then you have to remind them we are north of america and also part of america...
I think i have the number wrote down at mey desk at the museum, will check monday for ya
Jason