Tire size?

Chris · Post by **Chris** » Thu Mar 02, 2006 3:12 pm

Good evening all,

I am going to be buying some tires for my 51 M38 soon, and I was wondering, does it take the same size as a MB/GPW or the larger M38A1 tire size?

Thanks for the help, it is appreciated!!

Chris
Cortland, NY

ChuckW · Post by **ChuckW** » Thu Mar 02, 2006 4:29 pm

Chris, the Mb/GPW uses the 6:00 x 16 tire. For your M38A1, you need the 7:00 x 16 size. Two good sources are Coker Tire http://www.coker.com/ and Wallace Wade http://www.wallacewade.com/ The M38A1 came from the factory with Goodyear tires, but they are no longer available new.

Post by **wesk** » Thu Mar 02, 2006 6:18 pm

Your 51 M38 also came from the Willys Factory with Goodyear 7.00-16's.

Chris · Post by **Chris** » Thu Mar 02, 2006 6:36 pm

Thanks! I just checked with Coker, they sell two types of NDT's now, a regular and a cross country. both in the size you stated! Cool.

Thanks again!

Chris
Cortland, NY

Post by **wesk** » Thu Mar 02, 2006 7:02 pm

The NDCC or Cross Country is correct for your M38. NDT is the WWII tire and NDCC is the post WWII tire.

Ryan · Post by **Ryan** » Fri Mar 03, 2006 9:33 am

What exactly is the difference b/t the NDT and the NDCC?

ChuckW · Post by **ChuckW** » Fri Mar 03, 2006 11:30 am

Wes, correct me if I'm wrong, but the NDT tire has a more square sholder than the NDCC.

Post by **wesk** » Fri Mar 03, 2006 11:44 am

The tread design. The NDT has a more agressive and sharper edge. The NDCC is more roundish on the edges. The NDCC seems to handle hard surfaces better.

Chris · Post by **Chris** » Fri Mar 03, 2006 5:39 pm

Coker sells the NDCC for only a couple dollars more than the NDT so I guess I'll go with the NDCC. Thanks everyone!!

Chris

willysmjeeps.com

Tire size?

Tire size?

Thanks!

Tires