Rear seat cushion back size

RICKG · Post by **RICKG** » Tue Apr 17, 2012 10:27 am

The fact that Dave and Donna offered to "make it right" with you
speaks volumes about their character, integrity and customer svc.

wilfreeman · Post by **wilfreeman** » Tue Apr 17, 2012 3:45 pm

AMEN! That's why I am still going to get my top from them. Customer service/satisfaction is #1 in my book

Post by **wesk** » Wed Apr 18, 2012 2:11 am

The original factory art work and manual illustrations clearly show that cushion to be way too short. I wonder if Dave is assuming the WWII MB/GPW are the same as the M38/M38A1? They are not. The M38/M38A1 rear seat is over an inch wider. And your new cushion is an inch too narrow!

wilfreeman · Post by **wilfreeman** » Wed Apr 18, 2012 7:18 am

I asked him if there was a possibility that I got an MB one - he said they were just made. Of course, that doesn't rule out that maybe he used the wrong pattern. When I was taking pics to send to him I noticed that, in my overhead shot, the front of the cushion is about 1/4" wider on each side than the part touching the metal.