Fording kit mast - Help

lucianom38a1 · Post by **lucianom38a1** » Thu May 04, 2006 5:45 pm

Hello Fellows,

I recently imported the fording kit for my 1951´ M38, but however I still without the mast (metal suport rad) that supports the inlet air pipe (that don´t came with the Kit)
This fording kit are composed by the pipe, and all the brackets and screws to fix the pipe at the Mast.
Well, now I´ll try to do this mast by myself.
Could somebody help me with the dimensions of this pipe?? I saw in a forum document that the total lenght is 57"
There is a complete draw of this?

Regards,

Luciano

Cacti_Ken · Post by **Cacti_Ken** » Thu May 04, 2006 7:08 pm

I am working on a photo and some measurements for you.

Cacti_Ken · Post by **Cacti_Ken** » Thu May 04, 2006 8:10 pm

Luciano you have mail!!

OKCM38CDN · Post by **OKCM38CDN** » Thu May 04, 2006 9:29 pm

FYI, Brent Mullins carries this pipe... I got one from him a couple of months ago...

Hope this helps...

lucianom38a1 · Post by **lucianom38a1** » Fri May 05, 2006 6:53 am

Ken,

Great material! Is exactly what I'm looking for.
Now, I just need to find a good 1" tube and a couple of beers!!

OKCM38CDN, first I'll try to make it by myself. Other way, I'll contact Brent Mullins.

I'll post some pictures when I finish.

Thanks for all !!

davem201m38 · Post by **davem201m38** » Sat May 06, 2006 1:03 am

Hi can I ask where you bought your kit from? and did it have a replacement air intake hose with it,
Thanks,
Dave.

OKCM38CDN · Post by **OKCM38CDN** » Sun May 07, 2006 7:17 am

Dave,

John at Midwest Military carries the hose... that is where I got mine from...

Hope this helps...

Post by **wesk** » Sun May 07, 2006 10:21 am

This is the hose type original to the 1952 kit which came in a sealed crate.