spring eye bolt
- bl5211a
- Jeep Enthusiast

- Posts: 344
- Joined: Wed Dec 27, 2006 6:00 pm
- Location: NC
spring eye bolt
Is grade 5 spring eye bolt ok? I noticed torque is fairly low (27 ft lbs). So i am thinking grade 5.
- wesk
- Site Administrator

- Posts: 16468
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
Torque is low but shear is high. Grade 8 is a better choice.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
- TomM
- Moderator

- Posts: 458
- Joined: Sun Apr 17, 2005 6:00 pm
- Location: Rhode Island
suspension
Grade 8 is a good bet for suspension.
- bl5211a
- Jeep Enthusiast

- Posts: 344
- Joined: Wed Dec 27, 2006 6:00 pm
- Location: NC
- SledDog
- Contributor

- Posts: 91
- Joined: Sat Aug 13, 2011 6:00 pm
- Location: Litchfield Park Arizona
- wesk
- Site Administrator

- Posts: 16468
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
Generally a torch and a quality 1/2" or 3/4" drive air impact gun. Also do not forget that there are also some lefties!
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
- bl5211a
- Jeep Enthusiast

- Posts: 344
- Joined: Wed Dec 27, 2006 6:00 pm
- Location: NC
- SledDog
- Contributor

- Posts: 91
- Joined: Sat Aug 13, 2011 6:00 pm
- Location: Litchfield Park Arizona
- bl5211a
- Jeep Enthusiast

- Posts: 344
- Joined: Wed Dec 27, 2006 6:00 pm
- Location: NC
- wesk
- Site Administrator

- Posts: 16468
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
A lot of IFS are involved with vehicles that are over half a century old! The lefties have an "L" on them. That is the only positive way to be sure what you are wrenching on. As a last resort torch the bottom half of the shackle off to make it easier to drive each bushing out on it's own.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
- SledDog
- Contributor

- Posts: 91
- Joined: Sat Aug 13, 2011 6:00 pm
- Location: Litchfield Park Arizona