M38A1 Vacuum/Fuel Pump Question

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
voodoo4
Member
Posts: 13
Joined: Tue Feb 28, 2012 6:00 pm
Location: Florida

M38A1 Vacuum/Fuel Pump Question

Post by voodoo4 »

The mechanical vacuum/fuel pump in my 52 M38A1 is corroded and needs much TLC.

I have two questions.

The lower section of the pump contained a small amount of oil. Perhaps I have misunderstood something. I thought the vacuum system was dry. Is there supposed to be a lubricant in this system?

In any case the pump needs attention. Is there any particular vendor you would recommend for a rebuild kit, or to do the rebuild for me?

I am dead in the water with my restoration right now. Any advice or suggestions is greatly appreciated.
Voodoo4

2003 TJ Sport
1952 M38A1 USMC
User avatar
timjuhl
Jeep Enthusiast
Jeep Enthusiast
Posts: 262
Joined: Sun Jun 26, 2011 6:00 pm
Location: "Thumb" of Michigan

Fuel Pumps

Post by timjuhl »

Here is some general info: http://www.cj3a.info/tech/fuelpump.html

These folks have received good recommendations from others who have been in your situation http://www.maritimedragracing.com/antiq ... cellar.htm

Good luck!

Tim
Tim Juhl
1952 M38A1
1946 Aeronca L16A Army Liaison Aircraft
User avatar
RICKG
Jeep Legend
Jeep Legend
Posts: 1752
Joined: Mon Aug 30, 2010 6:00 pm
Location: SO IDAHO

Post by RICKG »

2X on Then and Now. Quick svc, Dun-rite 1st time, No surprises.
keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a
Post Reply