Ignition coil (24V for M38) resistance

Nuffe · Post by **Nuffe** » Fri Sep 07, 2012 11:42 am

I am still working with my problem
my motor will not idle.properly...
Now I think there is something wrong in ignithon
I want accurate data for my ignithon coil
no DAAE07-79-C-5440
I measure resistance primer is 5.7 ohm
ans seconder is 243 Kohm
is this ok?
thanksthomas

capescw · Post by **capescw** » Fri Sep 07, 2012 6:06 pm

This might help answer your question:

http://willysmjeeps.com/v2/modules.php? ... resistence

It's a previous post regarding the same question.

Post by **wesk** » Fri Sep 07, 2012 7:38 pm

My photo gallery will have most answers for most questions posted here:
http://www.willysmjeeps.com/v2/modules. ... php&page=1

Nuffe · Post by **Nuffe** » Sat Sep 08, 2012 1:20 pm

Thanks
now i want to separate the components in the distributor
is there an manual?
I have to separate the shafts?

Post by **wesk** » Sat Sep 08, 2012 2:21 pm

http://www.willysmjeeps.com/v2/modules. ... tit&lid=15

Nuffe · Post by **Nuffe** » Sun Sep 09, 2012 8:11 am

Hi
great
thanks
just what I neep
In what manual did you get it?

THOMAS

Post by **wesk** » Sun Sep 09, 2012 3:18 pm

TM 9-1825B Auto-Lite electrical component service and overhaul manual.

Nuffe · Post by **Nuffe** » Mon Sep 10, 2012 9:19 am

Thanks
great
I will get this manual
regards
Thomas

Ignition coil (24V for M38) resistance

Ignition coil (24V for M38) resistance

Previous post