24v distributor

Nuffe · Post by **Nuffe** » Sun Sep 09, 2012 11:49 am

I have my 24 v sealed distributor completly
taken apart, thanks to recieved informations.
There is a little spring "anti rattle spring"
( under the breaker plate)
part RR on fig 153 on page 241 in given instruktion.
The anti rattle spring is broken, !! Where can I find one and
wher shall it fit??
regards
thomas

chrisk · Post by **chrisk** » Sun Sep 09, 2012 1:11 pm

Which vehicle and which manual?

Chris

Post by **wesk** » Sun Sep 09, 2012 3:17 pm

It's the same anti-rattle spring for the M38 and the M38A1 distributor. Goes around the sahft and applies spring load to flyweights of the governor to kepp them from chattering. Tough to describe. Will have to find a photos.

Post by **wesk** » Sun Sep 09, 2012 9:21 pm

Here's the spring:

I have loaded photos of the install stepos in my photo album:
http://www.willysmjeeps.com/v2/modules. ... _album.php

Nuffe · Post by **Nuffe** » Mon Sep 10, 2012 7:22 am

Thank you sir...

i think I understand
I look for a new spring or I have
to make one.

nice to have your answers so quickly..

thomas

Post by **wesk** » Sat Sep 15, 2012 1:23 am

I found a new spring at: http://willysdistributors.com/index.html
Just email him the part number.

Nuffe · Post by **Nuffe** » Sun Sep 16, 2012 3:30 pm

Hi
thanks
This is excellent....
Thanks for your service
very much

Thomas Bjorkman
M38