Can I replace the left side of an axle with a Sicer replacement and not worry about the other side if it is a Bendx or Repezza???
Or do I need to change both out and make them match?
Trying to calculate costs and options... still need to tear the front axle down, but need to caculate costs also...
Axle Compatibility...
-
OKCM38CDN
- Jeep Enthusiast
- Posts: 530
- Joined: Thu Feb 16, 2012 6:00 pm
- Location: Del City, OK
Axle Compatibility...
Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
-
jeepjay
- Member
- Posts: 25
- Joined: Sat Sep 25, 2010 6:00 pm
- Location: monroe wa.
-
wesk
- Site Administrator
- Posts: 16467
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
But you must adjust the steering stops to the most conservative value so you do not damage the knuckle joint which tolerates the least amount of travel.
Bendix = 23 Degs.
Rzeppa = 29 Degs.
Spicer = 27.5 Degs.
Chapter O page 235 in SM1002
You must also set end play up correctly for each type axle. IE threaded end vs floating non-threaded end.
See Chapter M of SM1002
http://www.willysmjeeps.com/v2/modules. ... _album.php
Bendix = 23 Degs.
Rzeppa = 29 Degs.
Spicer = 27.5 Degs.
Chapter O page 235 in SM1002
You must also set end play up correctly for each type axle. IE threaded end vs floating non-threaded end.
See Chapter M of SM1002
http://www.willysmjeeps.com/v2/modules. ... _album.php
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php