jumper recepticle on pass fender

spe · Post by **spe** » Wed Apr 10, 2013 5:52 pm

I have a 3/52 m38 and need a 2 wire set up. Is bendix correct? Do I need one to ground to the fender or to the frame? where can I get one and a price?
thanks

Post by **wesk** » Wed Apr 10, 2013 6:08 pm

It's called a slave receptacle ORD# 7731421 and sells as a kit. I don't know anyone stocking the correct M38 cable length. The most common kit out there has a 40" + cable and 11" - cable. The + wire goes to the starter switch terminal on the starter. The - wire goes to the front support bolt for the starter. If you can get a receptacle then make your own wires from 2 AWG cable. The + cable is 29" and the - cable is 33".

Also remember they came in early and late receptacles as in single pin or two pin (both of which have two cables).

kenperkins · Post by **kenperkins** » Wed Apr 10, 2013 10:07 pm

bendix is the proper early one for show, but there all the same

RICKG · Post by **RICKG** » Thu Apr 11, 2013 2:00 pm

I've got one for sale-PM if you're interested i will get
you particulars and pics..