Hello from the Philippines. I'm Rommel from MDJuan

RommelJuan · Post by **RommelJuan** » Thu May 09, 2013 7:24 am

so who's interested in the License plate holders?

Xamon · Post by **Xamon** » Thu May 09, 2013 8:54 am

I am interested.

RommelJuan · Post by **RommelJuan** » Sun May 12, 2013 9:45 pm

Preview of the Quadratec/MDJuan BBQ in PA.

We had fun

Xamon · Post by **Xamon** » Tue May 14, 2013 7:40 am

This is probably asking a lot, perhaps beyond your manufacturing capabilities at this time but, any chance of doing a reproduction of the ramsey winch and associated parts in the future?

RommelJuan · Post by **RommelJuan** » Tue May 14, 2013 8:35 am

which model? was there one for the M38?

ECVJeeps · Post by **ECVJeeps** » Tue May 14, 2013 9:38 am

The Ramsey 50 and the replacement 50R were the winches installed on the M38.
There are pictures in my picture folder or I have pictures and access to a 50R winch set up if required.

http://www.surfacezero.com/g503/showgal ... p?cat=1082

If you need anything else you can contact me at pcn@ns.sympatico.ca

Cheers
Pat Newman

RommelJuan · Post by **RommelJuan** » Tue May 14, 2013 9:48 am

i need a sample so we can copy it

ECVJeeps · Post by **ECVJeeps** » Tue May 14, 2013 10:06 am

I have a copy of the winch frame assembly built from an original, I also have AutoCAD drawings of the winch frame assembly.

I can ask the owner (a close friend) of the original Ramsey 50R winch Assembly if he would be willing to ship the winch assembly so you would have a complete set up including the very hard to find hanger bearing and all shafts.

RommelJuan · Post by **RommelJuan** » Tue May 14, 2013 10:09 am

great. Where will it come from? I'll figure out where to send it. We will be at the Willys Reunion in Hudson Ohio this weekend. Any chance you'll be there?

ECVJeeps · Post by **ECVJeeps** » Tue May 14, 2013 10:13 am

If he agrees It will be coming from Halifax, Canada. I will get in touch with him this evening and pm you later.

Cheers
Pat Newman

whydahdvr · Post by **whydahdvr** » Thu May 16, 2013 8:11 am

Spoke with Rommel this morning while he was visiting the Bensinger's. The new doors they've developed are the folding type and will have the handles on them. However, they're using a bolt to hold the handles on the frame. The originals apparently had a crimped pin or something. To me, not an issue since I'm looking at function over form - and not looking at showing my jeep regardless.
Just thought I would share. I'll be ordering a pair soon. I'll still have to get the correct canvas set and doors. I just have the "Summer" top that came with the jeep; I know not "correct" but functional.

Post by **wesk** » Thu May 16, 2013 9:14 am

The 50 and 50R differed in ratings and cable used. The most common was the 50R and that would be the one to reproduce. An outfit in Europe reproduced them many years ago. There are also very good photos in my album as well. Shipping from Canada to the Philippines will not be cheap!

http://www.willysmjeeps.com/v2/modules. ... _album.php

http://www.willysmjeeps.com/v2/modules. ... _album.php

RommelJuan · Post by **RommelJuan** » Sat May 18, 2013 6:09 am

at the Wilys Reunion , Hudson Ohio

From left to right:
misterberry, samcj2a, Joe Friday, jpet, RommelJuan, sandusky, lowenuf

C15TA · Post by **C15TA** » Wed May 22, 2013 5:53 pm

Hi Rommel
I really enjoyed your presentation at the Hudson Reunion. You have a very impressive company.
Barry

RommelJuan · Post by **RommelJuan** » Fri May 24, 2013 9:37 am

here's the MDJuan Video that we debuted at the Willys Reunion

http://www.youtube.com/watch?v=xQJnVX29X_I

Enjoy!