Mirror Bracket & Holes

Cacti_Ken · Post by **Cacti_Ken** » Tue Aug 01, 2006 8:33 pm

The Mirror bracket you see in the photo with the Arm is what I took off my jeep body. the two small brackets I acquired from my brother. However I think it is missing some parts for the correct mirror bracket.

I don't believe the bracket I removed from the jeep is correct because the holes in the tub did not exactly fit the bracket. But it was bolted to some of them and was usable.

I would like to know what attaches to the holes in the next photo.

maeserik · Post by **maeserik** » Wed Aug 02, 2006 3:25 am

a picture of mine :

sorry, on this the pic the doorgliders were not installed yet

Erik

BobW · Post by **BobW** » Wed Aug 02, 2006 4:40 am

Here is my M38

maeserik · Post by **maeserik** » Wed Aug 02, 2006 8:20 am

i found a better pic

Erik

Cacti_Ken · Post by **Cacti_Ken** » Wed Aug 02, 2006 9:26 am

Well, from your pic there Maeserik I have some extra holes. #3, 4,& 5.

And The bracket in my photo which was on my jeep tub is incorrect.

So looking at your mirror setup, I need another part to go with the two small brackets to make a complete bracket.

BobW · Post by **BobW** » Wed Aug 02, 2006 6:35 pm

I think #3 is an extra hole. 4+5 are for the door channel.

Post by **Ryan_Miller** » Wed Aug 02, 2006 6:53 pm

I agree. # 3 is probably a bubba's extra hole.

Cacti_Ken · Post by **Cacti_Ken** » Wed Aug 02, 2006 7:01 pm

That's not to bad then, One extra hole.

Post by **wesk** » Wed Aug 02, 2006 8:26 pm

maeserik · Post by **maeserik** » Thu Aug 03, 2006 1:15 am

John Bizal midwestmilitary has them !

I bougt several parts there, and always good quality and original !
In Europe we have supliers in the UK, but they are expensive there !