Bellcrank woes(continued)

chrisk · Post by **chrisk** » Mon Dec 16, 2013 3:16 am

The Bracket, steering bellcrank support with sizes:

Chris

Post by **wesk** » Mon Dec 16, 2013 10:53 am

Hello Chris. Very nice job on providing a clear set of dimensions. Can you help with some information on that inner portion that the main pivot pin is contained in?

chrisk · Post by **chrisk** » Mon Dec 16, 2013 3:22 pm

Hi Wes,
The bracket, steering bellcrank support WO-804453 is an one piece cast steel part!
The red arrow(left) indicates the shaft (steelbolt) pivot bellcrank WO-649219 with size 7/8".
The red Arrow(right) the spigot for the seal,bellcrank tp bracket WO-801566.
The yellow line does not exist (one piece).
Hopefully make the photos clearly.
Chris

Post by **wesk** » Mon Dec 16, 2013 4:58 pm

Perfectly clear now. Bolt is inside the bracket in your first photo. Thanks Chris.