windshield down driving
-
kenc80
- Member
- Posts: 45
- Joined: Thu Jul 04, 2013 6:00 pm
- Location: Greenville, SC
windshield down driving
As I freeze down here in SC I have been daydreaming of windshield down driving this summer in my A1, which has original glass panes.
my questions is: will lowering the front windshield put the glass at greater risk for cracks, breaking, vibration etc etc or am I pretty good to go?
I read online a guy with an MB absolutely loves running "topless" in the summers.
Just wanted to make sure it was safe for the winshield!
Cheers and stay warm fellas!
Ken
my questions is: will lowering the front windshield put the glass at greater risk for cracks, breaking, vibration etc etc or am I pretty good to go?
I read online a guy with an MB absolutely loves running "topless" in the summers.
Just wanted to make sure it was safe for the winshield!
Cheers and stay warm fellas!
Ken
- RICKG
- Jeep Legend

- Posts: 1752
- Joined: Mon Aug 30, 2010 6:00 pm
- Location: SO IDAHO
An observation from a guy with 30 yrs in the glazing industry.
When transporting glass always transport in a vertical position-(on edge).
Glass when on a horizontal plane will bow or sag under it's own weight
therefore is at a higher risk of breakage.
Glass lites in 1/4" lami at the sizes we use in our jeeps are relatively
safe from breakage provided your glazing gaskets are tight and in
good condition and your windshield frame is securely strapped down.
Just bear in mind that glass on a horizontal plane, unless its laying
flat on a table, is always at greater
risk for breakage than glass on a vertical plane.
My 2c, hope it helps.
When transporting glass always transport in a vertical position-(on edge).
Glass when on a horizontal plane will bow or sag under it's own weight
therefore is at a higher risk of breakage.
Glass lites in 1/4" lami at the sizes we use in our jeeps are relatively
safe from breakage provided your glazing gaskets are tight and in
good condition and your windshield frame is securely strapped down.
Just bear in mind that glass on a horizontal plane, unless its laying
flat on a table, is always at greater
risk for breakage than glass on a vertical plane.
My 2c, hope it helps.
keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a
RICKG MC 51986 DOD 01-52, '50 CJ3a
-
kenc80
- Member
- Posts: 45
- Joined: Thu Jul 04, 2013 6:00 pm
- Location: Greenville, SC
- Bretto
- Jeep Legend

- Posts: 1390
- Joined: Tue Nov 23, 2010 6:00 pm
- Location: Orem, UT
- RICKG
- Jeep Legend

- Posts: 1752
- Joined: Mon Aug 30, 2010 6:00 pm
- Location: SO IDAHO
- Jim
- Active Member

- Posts: 196
- Joined: Wed Apr 13, 2005 6:00 pm
- Location: Van Buren, Arkansas
- Contact:
- wesk
- Site Administrator

- Posts: 16467
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
Check your local laws. A few states do not allow operation on the road without a windshield and some require the used of a facemask or goggles when operation without a windshield.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
-
skyjeep50
- Jeep Enthusiast

- Posts: 606
- Joined: Mon Feb 19, 2007 6:00 pm
- Location: Illinois
- Jim
- Active Member

- Posts: 196
- Joined: Wed Apr 13, 2005 6:00 pm
- Location: Van Buren, Arkansas
- Contact:
- timjuhl
- Jeep Enthusiast

- Posts: 262
- Joined: Sun Jun 26, 2011 6:00 pm
- Location: "Thumb" of Michigan
Windshield
I frequently drive with the windshield strapped down with no problems. Indeed, when I tow the Jeep on my trailer I strap it down as well. The reason for the latter is reduced drag and to protect it from flying stones.
I would think that with the relatively small size of the panes, if the glass is tight in the frame it should ride OK.
One thing I do to protect the paint on the hood when the windshield is down is slip a piece of foam like they use to wrap pipes around the frame standoffs. It provides a little more cushion than the stock webbing.
Tim
I would think that with the relatively small size of the panes, if the glass is tight in the frame it should ride OK.
One thing I do to protect the paint on the hood when the windshield is down is slip a piece of foam like they use to wrap pipes around the frame standoffs. It provides a little more cushion than the stock webbing.
Tim
Tim Juhl
1952 M38A1
1946 Aeronca L16A Army Liaison Aircraft
1952 M38A1
1946 Aeronca L16A Army Liaison Aircraft
- Xamon
- Jeep Enthusiast

- Posts: 593
- Joined: Mon Sep 17, 2012 6:00 pm
- Location: South East Saskatchewan
Little side question, for those who regularly drive window down, do you have the locking strip on the outside or inside of the window? I know when I took mine out it was on the outside.
Carievale Saskatchewan Canada
http://www.willysmjeeps.com/v2/modules. ... _album.php
http://www.willysmjeeps.com/v2/modules. ... _album.php
- RICKG
- Jeep Legend

- Posts: 1752
- Joined: Mon Aug 30, 2010 6:00 pm
- Location: SO IDAHO
- SteveJ
- Contributor

- Posts: 110
- Joined: Mon Jun 13, 2005 6:00 pm
- Location: Calgary Alberta
I got to admit I prefer the window down. Jeeps got a nice quiet feeling about it.
Though when Im out on an errand on the road and prefer the better security and no bugs in my teeth I run with the window up.
An you know it looks great both ways.
Though when Im out on an errand on the road and prefer the better security and no bugs in my teeth I run with the window up.
An you know it looks great both ways.
SteveJ
1986 CDN Armstron MT500 dispatch Motorcycle
1986 arrow 1.75 t cargo trailer
1991 Reynolds Boughton RB44 GS TUH
1952 M38 CDN W/W (Sold)
1953 M100 CDN Trailer
1951 PE95K Genset (Sold)
1986 CDN Armstron MT500 dispatch Motorcycle
1986 arrow 1.75 t cargo trailer
1991 Reynolds Boughton RB44 GS TUH
1952 M38 CDN W/W (Sold)
1953 M100 CDN Trailer
1951 PE95K Genset (Sold)

