Hello - What is the proper procedure for adjusting the engine stay cable. This is the cable that attaches to the flywheel / bell housing and the transmission/ transfer case x-member.
Brian
M170
M38a1/ M170 engine stay cable
-
bl5211a
- Jeep Enthusiast
- Posts: 344
- Joined: Wed Dec 27, 2006 6:00 pm
- Location: NC
M38a1/ M170 engine stay cable
Brian
1955 M170
1940 BSA M20
1955 M170
1940 BSA M20
-
evanso1975
- Jeep Enthusiast
- Posts: 615
- Joined: Sun May 09, 2010 6:00 pm
- Location: North Yorkshire, UK
Check out the second paragraph on this page:
http://www.cj3a.info/tech/stay.html
1/2" up & down movement, so it should be snug but not over-tight.
http://www.cj3a.info/tech/stay.html
1/2" up & down movement, so it should be snug but not over-tight.
Owen
1951 US Air Force M38
1944 F-1 1/2-ton Airdrome Trailer
1940 C15 Chevrolet CMP 11-cab
1939 DKW KS200 Motorcycle
MVT # 19406
1951 US Air Force M38
1944 F-1 1/2-ton Airdrome Trailer
1940 C15 Chevrolet CMP 11-cab
1939 DKW KS200 Motorcycle
MVT # 19406