Rear seat dimensions

OldDinger · Post by **OldDinger** » Thu Aug 28, 2014 7:49 pm

I have searched to no avail. I need drawing/dimensions for the M38a1 rear seat frame. Any help would be appreciated.

upsmike · Post by **upsmike** » Sat Aug 30, 2014 12:52 pm

I have a 1951 M38 seat. Would it be the same one that was in yours?
It has been recovered, but I can snap some pics and measurements for you if that would help

Post by **wesk** » Sat Aug 30, 2014 1:16 pm

The M38 and M38A1 use the same rear seat.

billybob · Post by **billybob** » Sat Aug 30, 2014 5:59 pm

Thank You Wes. You just answered a question that I was wondering about.

OldDinger · Post by **OldDinger** » Sat Aug 30, 2014 7:51 pm

Mike, that would be great. I used to make custom off road mini bikes and scooters, so I'll give the seat frame a try. I have a set of cushions coming from Beechwood.

upsmike · Post by **upsmike** » Tue Sep 02, 2014 10:41 pm

I'll get ya some pics hopefully Wednesday!

upsmike · Post by **upsmike** » Wed Sep 03, 2014 9:49 pm

The Back is 14" high by 31" wide
The seat is 17" deep by 31" wide

Someone has covered all the seats in black pleather....

(alt+p)

Post by **wesk** » Wed Sep 03, 2014 11:39 pm

That is a very heavily modified seat.

Here's a stock seat.

billybob · Post by **billybob** » Thu Sep 04, 2014 9:08 am

I too would like some more detailed measurements, such as where to make the bents etc. It doesn't look that difficult to make. With just a few measurements and straight ahead photos it can be scaled and copied. Thanks to anyone willing to help. Robert.

Rear seat dimensions

Rear seat dimensions

rear seat

I'll get 'em....

seat....

rear seat