battery
-
hillbilly21
- Jeep Enthusiast

- Posts: 510
- Joined: Thu Aug 25, 2005 6:00 pm
- Location: North Carolina
NAPA
I HAVE USED THE 51 SERIES BATTERY IN THE SMALL COWL AND THE 51R SERIES UNDER THE HOOD BOX
NAPA HAS THEM , IF NOT THEY CAN GET THEM
NAPA HAS THEM , IF NOT THEY CAN GET THEM
-
hillbilly21
- Jeep Enthusiast

- Posts: 510
- Joined: Thu Aug 25, 2005 6:00 pm
- Location: North Carolina
Re: battery
YES AND WILL BE TONITE AND ALL DAY TOMORROW...buzzk wrote:thx Paul are u freezing your butt off yet buzzzzz
- 4x4M38
- Jeep Legend

- Posts: 3487
- Joined: Thu May 29, 2014 6:00 pm
- Location: Texas Hill Country
- wesk
- Site Administrator

- Posts: 16467
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:

As shown in this chart closest match is a 22NF.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
- TomM
- Moderator

- Posts: 458
- Joined: Sun Apr 17, 2005 6:00 pm
- Location: Rhode Island
51R
I have started using the 51R in place of the 2HN. They are standard in a lot of rice boxes so the prices of a good battery are less than half of the originals.
Height is about a half inch shorter.
The down side is that the length and width are smaller so you'll have to come up with a way of securing it. The original hold-down is too large, allows the battery to shift and can short the two terminals in a very bad way.
On the list of projects is to make a small tray adaptor and new hold downs so that the 51R fits and secures in a way that looks correct.
Height is about a half inch shorter.
The down side is that the length and width are smaller so you'll have to come up with a way of securing it. The original hold-down is too large, allows the battery to shift and can short the two terminals in a very bad way.
On the list of projects is to make a small tray adaptor and new hold downs so that the 51R fits and secures in a way that looks correct.
