M38 WIPER VACUUM PRESURE

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
CARBERAME
Member
Posts: 8
Joined: Wed Apr 01, 2015 6:00 pm
Location: BARCELONA, SPAIN

M38 WIPER VACUUM PRESURE

Post by CARBERAME »

HI. DOES ANY BODY KNOWS WHICH IS THE CORRECT VACUUM PRESSURE TO MAKE THE WIPERS PROPERLY WORK IN THE M38 OR M38A1? THANKS
Top
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16466
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:
Contact wesk

Post by wesk »

10" to 12" Vacuum. If this number is too low check intake vacuum before you condemn the fuel/vacuum pump.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
Top
User avatar
CARBERAME
Member
Posts: 8
Joined: Wed Apr 01, 2015 6:00 pm
Location: BARCELONA, SPAIN

Post by CARBERAME »

wesk wrote:10" to 12" Vacuum. If this number is too low check intake vacuum before you condemn the fuel/vacuum pump.
Thanks a lot!
Carlos
Top
Post Reply

Return to “Technical Knowledge Base”