lights and wiring

eagle64 · Post by **eagle64** » Sun Jul 19, 2015 7:58 pm

After firing up the m38 for the first time. I tried the lights, well the come on anyway.
My question is how do I check if I have the right connections.
when the light switch is set in any of the positions, what lights should come on. The reason I wondered if I had it right. is the stop light and cats eye were both on on drivers side and only the cats eye on the passenger side was on.
seems wrong but not sure of what should work with what here. I looked thru the TM's and didn't see anything covering this.

4x4M38 · Post by **4x4M38** » Sun Jul 19, 2015 8:29 pm

Steve,
Look in Wes' photos pages. He has photocopy and diagram pages
describing what lights should be on with the levers in which
positions.

Post by **wesk** » Sun Jul 19, 2015 8:41 pm

http://www.willysmjeeps.com/v2/modules. ... _album.php

eagle64 · Post by **eagle64** » Sun Jul 19, 2015 8:54 pm

I must be blind ,darn I didn't find this when I looked for it. but thanks guys this should give me what I need to figure out my lights.
thanks so much