Heat Riser Spring Rest Specs

Hawkshadow · Post by **Hawkshadow** » Sat Apr 23, 2016 8:16 am

Does anyone have the gauge and measurements for the heat riser spring rest? Mine is missing, and from looking at pictures I figure that I can fab it myself fairly easy.

southpw · Post by **southpw** » Sat Apr 23, 2016 8:43 am

Hope these help you Jordan

[URL=http://s1195.photobucket.com/user/south ... 7.jpg.html

[/URL]

southpw · Post by **southpw** » Sat Apr 23, 2016 8:43 am

Not the greatest pics. Sorry.

Post by **wesk** » Sat Apr 23, 2016 12:19 pm

Perhaps this will help.

southpw · Post by **southpw** » Sun Apr 24, 2016 4:57 am

Thanks for the CAD drawing Wes. I filled in the blanks. Hope this helps Jordan. I will add that this spring rest is not square. If you compare the CAD to my pic, you can see the rest actually is formed on an angle in the bends to offset the rest tip from the bolt hole.
edit: Wes fixed up the CAD drawing and is now here with more dimensions.

Post by **wesk** » Sun Apr 24, 2016 9:58 am

southpw · Post by **southpw** » Sun Apr 24, 2016 10:17 am

Cant see that image for some reason Wes.

southpw · Post by **southpw** » Sun Apr 24, 2016 3:27 pm

post #4 updated. Thanks Wes.

Post by **wesk** » Sun Apr 24, 2016 3:37 pm

Nice work Brad. Jordan, this should work for you now!

Hawkshadow · Post by **Hawkshadow** » Sun Apr 24, 2016 5:46 pm

Thanks for the help, gents. I was able to fab it up today. I'll post a picture of the finished product.