Free! Pay the shippingXXXX GONE!

usma41 · Post by **usma41** » Fri Dec 22, 2006 11:03 am

Anyone in need of a Voltage Reg. for a M38A1 Good Condition. Or anyone what to swap a Generator for a M38A1, for one for a M38.

Post by **wesk** » Fri Dec 22, 2006 12:21 pm

Frank,
All the Auto-Lite GHA4802 series 24 volt 25 Amp generators will interchange and work just fine on the M38, M38A1, M170, and early M151 Even the Delco Remy 1117486 and 1117495 genertator will work just fine in all the above applications.

The Auto-Lite VBC4002UT regulator was used by Willys on all M38, M38A1, M170 production. The 24 volt 25 amp Delco regulator will work in the same setups as the VBC4002UT and VBC4003UT regulators.

usma41 · Post by **usma41** » Fri Dec 22, 2006 12:51 pm

This is a :VBC4002UT

Bill_F · Post by **Bill_F** » Fri Dec 22, 2006 2:04 pm

I could use the regulator

Bill_F · Post by **Bill_F** » Fri Dec 22, 2006 2:05 pm

I could use the regulator

usma41 · Post by **usma41** » Fri Dec 22, 2006 2:23 pm

You got it Bill, let me find out how much to ship and I'll get back to you.

usma41 · Post by **usma41** » Fri Dec 22, 2006 3:58 pm

Wes, delete this POST, it's gone.