Rear light switch six pin connector

4x4M38 · Post by **4x4M38** » Sun Jul 31, 2016 9:27 am

Six pin plug for two connector Bendix
light switch.

For those folks that have the two connector light switch
and want to keep the separate rear harness. I searched
a while and could not find one of the Bendix OEM plugs.

This guy on eBay had a six pin plug with male end and
swapped the internals out to make it female. It screws
right into the Bendix light switch.

It is not OEM but will work and was probably a replacement
when the original was damaged.

http://m.ebay.com/itm/Willys-Jeep-Wire- ... nav=SEARCH

BCA · Post by **BCA** » Sat Oct 01, 2016 6:07 pm

NOS plugs are not a problem for the early 2-plug light switch. PM me if you need one... Brian

4x4M38 · Post by **4x4M38** » Sat Oct 01, 2016 7:42 pm

Thanks Brian!

I have found one, but am sure others can appreciate the lead.