F134 owners - head bolt washers

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
cabinfever
Active Member
Active Member
Posts: 201
Joined: Mon May 13, 2013 6:00 pm
Location: Between Crosslake and Emily, Minnesota

F134 owners - head bolt washers

Post by cabinfever »

I need a favor. I am in the throes of replacing my cylinder head gasket. The TM indicates that there should be a washer associated with every head bolt. On my F134 only two of the 15 head bolts had washers (ie, the two head bolts for the lifting hook).

Could you do me a favor and pop the hood of your jeep and let me know if the head bolts that you can easily see have washers?

Thanks
Steve Stark - 1955 M38A1 MD #85388

Member - MVPA #35153
Member - Red Bull Historic Military Vehicle Association
User avatar
BBDE
Contributor
Contributor
Posts: 79
Joined: Tue Mar 04, 2008 6:00 pm
Location: Berlin Germany

Post by BBDE »

You need 11 washers (8329680 / 103342) for the 15 bolts.
The washers are not under all of the bolts.
Where the green marks are, you have to install washers, where the red stars not.
At the rear of the liftinghook, the washer comes under the hook, to accord the difference from the oil filter canister bracket.
Image

Image

Image

Sincerely
Frank
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16463
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

Hello Frank,

That was a superb answer. You did not leave a single stone unturned!
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
cabinfever
Active Member
Active Member
Posts: 201
Joined: Mon May 13, 2013 6:00 pm
Location: Between Crosslake and Emily, Minnesota

Post by cabinfever »

BBDE, that is perfect!

danke schön! :D
Steve Stark - 1955 M38A1 MD #85388

Member - MVPA #35153
Member - Red Bull Historic Military Vehicle Association
User avatar
Trip
Contributor
Contributor
Posts: 128
Joined: Sun Oct 30, 2016 6:00 pm
Location: Houston, Texas

Post by Trip »

BBDE,

Your reply is very impressive. I have 2 questions for you. (1) What is the tool in the foreground of the first photo? (assuming it is a tool) and (2) what paint color (Brand and ID) did you paint the engine?

Charles
Trip
Houston TX
51 M38 MC 25423
52 M38
M38 recently acquired Some parts only, roller
67 CJ5
51 CJ3A
49 CJ2A
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16463
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

I was going to mention that tool. It is rarely seen in shops today. I have a couple. They are a strap wrench.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
BBDE
Contributor
Contributor
Posts: 79
Joined: Tue Mar 04, 2008 6:00 pm
Location: Berlin Germany

Post by BBDE »

Wes is right, it´s a strap spanner tool.
Found it many years ago at a DRMO scrap yard, didn´t know what it is,
but it was looking intresting, so I thought to take it with me.
Years later I figured out, what that tool it is working for too:
So, that work can be done yery easily.
Image

Image

The question of coulor.

At first, I take the same paint for the engine, than for the body and frame.
No special paint is needed.
Exept the exhaust manifold.

Here in europ (particular in Germany) it´s yery difficult to get the right OD paint for the M- Series Vehicles of the 50-60´s.
The Paint, you can buy from the dealers is very different to that you want to have.
So I try mixing the right shade by my self.
The mixture of OD 24087, I belive, is a top secret.
The only way ist to try, and try, and try once again.



Try and error, once again........
No.9 looks good.......
Image

To a kind of matching
(above the original)




But its not the end of the way.
OD 24087 was not, and isnt always the same.



What will be the 100% right paint shade?

In my opinion:
All of them!

The european paint code RAL 6022 (Braunoliv) is the paint I use many years for my M-series vehicles.
It also comes yery close to what I belive is right for a Motor Pool restauration.



duck and cover

Sincerely

Frank
Last edited by BBDE on Fri Dec 04, 2020 2:03 am, edited 1 time in total.
User avatar
cabinfever
Active Member
Active Member
Posts: 201
Joined: Mon May 13, 2013 6:00 pm
Location: Between Crosslake and Emily, Minnesota

Post by cabinfever »

Frank, that is an awesome collection. Thanks for sharing. It gives me inspiration!
Steve Stark - 1955 M38A1 MD #85388

Member - MVPA #35153
Member - Red Bull Historic Military Vehicle Association
Post Reply