T -Case Ring

[reddog]

Anybody know the proper screw size for the Transfercase Shifters boot ring?

Thanks reddog

[wesk]

The 4 screws that retain the boot ring item B in this photo.

The ring and it's four attaching screws are in the appropriate ORD 9

For the M38 ORD 9 SNL G-740 Page 301



For the M38A1 ORD 9 SNL G-758 page 329.




Very similar to this one

Reddog, If you can take a moment and go to your profile and add a signature block to all your post. Then I would suggest you insert your common first name and the year, make, model of your jeep and/or trailer. Then we will all know immediately what vehicle your question is about. Plus we'll learn to recognize your real name instead the call sign thingy.

[reddog]

Thanks again Wes.
I will complete my profile.

[wesk]

Looks like you weren't able to upgrade your profile. Let me know the real first name. & year/make/model of your jeep and I'll add the signature block for you.

[reddog]

Is this better

[reddog]

Again

[wesk]

Yep

[Trip]

Wes,

Is this one place where Phillips head screws were used?

Trip

[wesk]

If you note carefully the M38 ORD 9 page shows the original screw was a common slotted. The supersedure is a crosspoint for the M38 and was the original on the M38A1 starting at the beginning of A1 production in the summer of 1952. It wouldn't surprise me to see a factory original slotted screw in any 1952 M38 or any 1952 M38A1. We all know that the production line threw NOTHING away!

[Trip]

Wes,

Thank you. I have not mastered the documents as well as you but I am trying. I bought an M 38 last year that was mostly original and it has been my research vehicle while I continue work on 2 others. I have found mostly slotted screws on the original M 38.

trip