Delco-Remy Voltage Regulator

reddog · Post by **reddog** » Sat Mar 24, 2007 10:08 pm

I have a 4 unit Delco-Remy voltage regulator I have read the download from this site for it. I set all the gaps as per the info in the download and was able to adjust the voltage to the proper amount. But I did not see how to adjust the cut in and cut out of the circuit breaker relay? From what I got from the download it is controlled by the actuating relay but it only makes reference to the pre setting not how to adjust it. Did I miss something? Also I flashed the field of the generator to get it up and going but I have had to do it every day since I started playing with the charging system.

Thanks Bruce

Post by **wesk** » Sun Mar 25, 2007 7:10 am

Bruce,
Looks like pages 10 and 14 thru 18 didn't make the transition from the old web site to this one. I'll have to get them loaded.

reddog · Post by **reddog** » Mon Mar 26, 2007 12:37 pm

Thanks alot Wes that would be the imformation I need.

Bruce