I bought a used 24 volt genarator for my M38 project which did not come with one, and after looking at it closer today I'm not sure it's the correct one. It seems that the distance between the mounts on the generator is about 1/2 wider than the distance outside to outside on the mounting bracket and the front plate on the engine. It could be shimed but I would rather have the correct one . Here are the numbers from the tag on it.
It's Delco...ORDANCE # 7355736
model #1117495
Thanks in advance!
Is this the correct 24 Volt Generator?
Moderators: TomM, Moderator, wesk
-
highland62
- Member
- Posts: 14
- Joined: Sat Mar 24, 2007 6:00 pm
- Location: Dartmouth ,Nova Scotia
-
wesk
- Site Administrator
- Posts: 16413
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
That's the correct replacement generator for a M38. I'll bet you have the civvy generator bracket.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
-
highland62
- Member
- Posts: 14
- Joined: Sat Mar 24, 2007 6:00 pm
- Location: Dartmouth ,Nova Scotia
generator bracket
Wes ,thats must be it because I also had to replace the brackett.Neither were with on it ,and I got the bracket from someone else.What do I look for when searching for a military bracket?