firewall auxilary power plug

Discussion topics on Willys Overland M series vehicles

Moderators: TomM, Moderator, wesk

Post Reply
User avatar
DFoley
Member
Posts: 109
Joined: Wed May 04, 2005 6:00 pm
Location: Del Rio, Texas

firewall auxilary power plug

Post by DFoley »

How is the small auxiliary plug located on the firewall of early M38's connected to the power supply. My wiring harness did not have this item prewired. I am assuming I will have to tie into another wire... but which one? Doe anybody out there have a functioning auxiliary plug? Once this is done I am also assuming that the power supplied to the lug will be 24v. Where can I find the appropriate connector type plug so that i can use this plug as it was intended...to provide power to auxiliary equipment. For example I would like to be able to plug a spot light into this plug, if i can get it working.

Any idea on the type of equipment that the military might have plugged into this receptacle while in the field?
Thanks,
Dan
1951 M38
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16413
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

They probably pluged in a spot light, or emergency lights or trouble lights or fleet type radios. It had it's own power lead right off the top circuit breaker in the trio mounted on the inboard side of the cowl battery box.


Image



Image

You should be able to match a Cannon plug assembly to it.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
Post Reply