transfer case leak

oreo3156 · Post by **oreo3156** » Fri Jul 20, 2007 10:41 pm

I developed a transfer case leak on my A1. It is coming out where the plungers come out of the front of the case to shift it into high/low and 4wd/2wd. Appears to be both places. Any advice?

Post by **wesk** » Sat Jul 21, 2007 7:20 am

You can pull that front shift case off with the unit still on the jeep and install new ORD# 500007 garloc seals (N). You'll have to support the transfer's right side and raise it slightly, pull the shift levers, front drive shaft, front drive yoke (K, J & H) and out she comes. Probably help to loose the shift detent balls (P, Q, R & S).