Hi to all,
Besides the 1/8 to 3/16 distance as per the manuals and all discussions, is there the equivalent measurement in degrees I can give to the shop with the modern equipment so they can adjust it?
Thanks ahead once more![/list]
Toe-in in Degrees?
Moderators: TomM, Moderator, wesk
- arisLgr
- Member
- Posts: 119
- Joined: Sat Dec 24, 2016 6:00 pm
- Location: Athens, Greece
Toe-in in Degrees?
Aris
Willys M38
1936 Cord Phaeton
1954 Mercury Monterey
1968 Corvette Stingray
1973 Mercedes 350SE
1974 Montesa Cota 247T
Willys M38
1936 Cord Phaeton
1954 Mercury Monterey
1968 Corvette Stingray
1973 Mercedes 350SE
1974 Montesa Cota 247T
-
- Member
- Posts: 2067
- Joined: Wed Oct 01, 2014 6:00 pm
- Location: South Carolina, Dorchester County
Hi Aris,
There's on-line calculators.
Here's one: https://robrobinette.com/ConvertToeInchesToDegrees.htm
I bet your alignment shop can also do it.
Good luck!
There's on-line calculators.
Here's one: https://robrobinette.com/ConvertToeInchesToDegrees.htm
I bet your alignment shop can also do it.
Good luck!
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
- arisLgr
- Member
- Posts: 119
- Joined: Sat Dec 24, 2016 6:00 pm
- Location: Athens, Greece