OK, just checking as I've seen discussion on this before.
About to rebuild my M38 engine, I last did this years ago on another jeep.
My manual TM 9 1804A states, "Make sure the oil squirt hole in the connecting rod is opposite the T slot in the piston"
Is this correct? I'm sure I've read of a misprint in one of the manuals.
Thanks, Dave.
T-Slot
-
davem201m38
- Jeep Enthusiast
- Posts: 439
- Joined: Sat Jan 21, 2006 6:00 pm
- Location: UK
T-Slot
David Wigham
-
wesk
- Site Administrator
- Posts: 16443
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
Re: T-Slot
Yes Paragraph 52 in your TM 9-1804A is correct. If you look closely at the illustration Figure 75 page 91 it will confirm this. If you review the Willys/Kaiser civvy manual for the CJ L-134 you will see and read the same info.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php