M38 or M100 unidentified bolts

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
Bertram
Member
Posts: 14
Joined: Sat Nov 26, 2022 6:00 pm

M38 or M100 unidentified bolts

Post by Bertram »

I cannot seem to find out where these go. The course threaded bolt on the left is 5/16 of an inch and there are four.

The wing nut square head bolt is also 5/16 18NC and there are two of these.

Thanks so much for all the help on this stuff.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16478
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:
Contact wesk

Re: M38 or M100 unidentified bolts

Post by wesk »

Your JPEG reference is not loading so you will have to give me a useable on line link to your bolt photos.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
Top
Post Reply

Return to “Technical Knowledge Base”