M38 windshield glass

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
cknight
Contributor
Contributor
Posts: 63
Joined: Sun Mar 19, 2006 6:00 pm

M38 windshield glass

Post by cknight »

What is the height and width of the glass for the M38?
Top
OKCM38CDN

Post by OKCM38CDN »

Go to a good glass dealer an tell them you need a piece of glas for a CJ3 and they can cut one to fit... It cost me $100 for piece of clear glass to be cut and installed ... well worth the headache unless you do this often enough. I don't...

Hope this helps...
Top
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16471
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:
Contact wesk

Post by wesk »

48 51/64 x 12 31/32 x 1/4"
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
Top
User avatar
gamillerman
Contributor
Contributor
Posts: 122
Joined: Thu Apr 20, 2006 6:00 pm
Location: Eden, Georgia

Windshield Glass

Post by gamillerman »

If you want I can provide you a template for the glass. I have an original glass taken out and provided another member with a template and it worked out fine
Top
User avatar
cknight
Contributor
Contributor
Posts: 63
Joined: Sun Mar 19, 2006 6:00 pm

Post by cknight »

Thanks for the offer. I have a glass for and m38a1 which should give the the corner radius and along with the height and width i should be able to get it.

After I get the last coat of paint on the frame I am going to take it to the gglass shop along the the gasket
Top
Post Reply

Return to “Technical Knowledge Base”