TRANSMISSION AND TRANSFER CASE BOOTS M38

north-shore · Post by **north-shore** » Sat Jan 26, 2008 7:32 am

Hi

,

What is the right TRANSMISSION AND TRANSFER CASE BOOTS for my M38 CDN

OKCM38CDN · Post by **OKCM38CDN** » Sat Jan 26, 2008 9:22 am

This is an answer to your other posts as well, all the parts are standard M-38 Parts. The CDN does not use anything different in these areas...

Only real difference was the stuff the RCEME put on for the army after it came from the factory... (Convoy lights, radios, special features required by the units)

Other than that they are stock and any vendor should have tha parts... your shift lever for the transmission will be push on and not screw on...

Hope this helps...

north-shore · Post by **north-shore** » Sat Jan 26, 2008 9:41 am

Hi,

Do you know if the shift lever for the transmission is round are flat

OKCM38CDN · Post by **OKCM38CDN** » Sat Jan 26, 2008 10:16 am

It is round when looking at the top, and oval shape if looking from the side... comparted to the transfer case knobs it would be flat...