M38a1 Tub bolts

RichJohnson · Post by **RichJohnson** » Sun Mar 23, 2008 3:37 pm

Im ready to mount the tub back on My M38a1 and I dont remember how many body bolts its takes minus the two in the bed that are special. Also, did they have washers/ lock washers on the bottom? If I remember correctly the bolts were 3/8 Fine but how long do they need to be?

Any help is appreciated.

Post by **wesk** » Mon Mar 24, 2008 9:55 am

The correct shims, cushions and hardware are listed by body mount position in section 1801 of your M38A1 ORD 9 SNL G-758 starting on page 316.

tdavis · Post by **tdavis** » Mon Mar 24, 2008 9:58 am

RichJohnson · Post by **RichJohnson** » Tue Mar 25, 2008 10:18 pm

Why do I count 16 rubber shims and only 10 bolts?
Am I off or doing something wrong? How is it supposed to be installed?
When I bought the shim kit from a very reputable dealer all the shims are the same thickness.