Page 1 of 1
Screws for light switch
Posted: Fri Aug 28, 2015 6:57 am
by 4x4M38
I've been through the ORD 9, as well as the Operations and
Maintenance manuals.
I can't find a good description of the four screws that attach
the Bendix light switch to the dash. It looks like they are 10-32
but I don't see any specifically described for that location.
Thanks,
Brian
Posted: Fri Aug 28, 2015 7:24 am
by wesk
I'll walk you thru it slowly.
ORD 9 SNL G-740 Page 154.
This is section 0607 Instrument panel
Near the bottom of the page are the three light switch assemblies in use up to that time.
Immediately after the last switch is the listing:
SCREW, int-teeth lockwasher, rd-hd, S, cd or zn-pltd, No. 10 (0.190)-32NF-2x1 1/2 QTY 4 ea
This would be a 10-32 (fine thread) steel screw, cad or zinc plated, fit class 2, 1 1/2" long with a permanent captured internal tooth lock washer.
Posted: Fri Aug 28, 2015 8:28 am
by 4x4M38
Thank you for the clarification Wes. I had been looking for
4 screws in number but there were several.
Appreciate the help.
Brian
Posted: Fri Aug 28, 2015 8:56 am
by wesk
As a basic rule of thumb when looking for attaching hardware it is usually right below the part in the IPL that you need the hardware for.