willysmjeeps.com

Looking at my driver seat it appears about 2 inches higher then the passenger seat.
/ihttp://willysmjeeps.com/v2/modules/gallery/albums/album315/jeep2rear.sized.jpg

The legs on both the passenger and driver side appear to be in the correct order--is this normal?

thanks-
Jose Garcia

Mine are the same height. I believe you may have a bit of bending somewhere.

I made a removable middle seat for my m38 basically making it a bench seat in the front. The seat heights for the original seats are the same height making this easy

Looks like you were right on target Wes--driver side has some bending on it compared to passenger side.


I remember seeing someone had fabricated both sides but cannot recall which gallery it was in .