Page 1 of 1
Dimensions of bumperettes - M38CDN
Posted: Sun Sep 13, 2015 10:46 am
by L84dinner
I would like to reshape the bumperetes on my 1952 M38CDN to the original dimensions. Is there a reference for the correct dimensions? What is the correct radius for the curves?
Thanks,
John
[/url]
Posted: Sun Sep 13, 2015 12:54 pm
by ROBCDN3
Hi. John. The bumpers are made of spring steel. There is a parts guy near you that may have a set of used ones. He is Brian in Acton 519-853-1738.
Cheers Rob
Posted: Sun Sep 13, 2015 7:36 pm
by Hawkshadow
Hey John,
If they aren't too out of shape fix them like the army did - bolt them back on to the frame, attach a rope to something solid and pull them out until they are parallel with the crossmber or until you are satisfied.
Posted: Sat Sep 19, 2015 3:57 pm
by Speedy
all good suggestions.
Brian is a great guy to deal with, always helpful.
I would also give hawkshadows suggestion a try, I have some stainless bumperettes and one of them is out of wack and I will be doing it this way also.
nice to see more locals!