Page 1 of 1
Identification
Posted: Mon Sep 04, 2006 11:01 am
by Roberto67
Hi, fellows!
A friend of mine, who owns a Willys M38 jeep, is trying to identicate these pieces, outlined here in red:
If this link doesn´t run, go to:
http://img.photobucket.com/albums/v82/R ... ezaM38.jpg
Cheers, and many thanks!
Posted: Mon Sep 04, 2006 12:14 pm
by wesk
They are for mounting the decontaminator jug.
Posted: Mon Sep 04, 2006 12:32 pm
by Cacti_Ken
Every time I looked at those items on my jeep I wanted to ask the same question. But when got back to the computer I would forget.
And now know.
Thanks
Ken
Posted: Mon Sep 04, 2006 12:37 pm
by Cacti_Ken
Roberto, I noticed in your photo a lock bolt welded to floor to hold the passenger seat down. I have one also, but is welded parallel to the tool box seam. I have often wondered if Bubba installed that.
Ken
Posted: Mon Sep 04, 2006 12:54 pm
by kenperkins
Ken, that gate bolt is a common add to the M38 passenger seat. I can't find it as an offical MWO but had it on mine and have seen it lot on m38s I've taken apart.
Posted: Mon Sep 04, 2006 1:55 pm
by Cacti_Ken
Thanks Ken, good thing I didn't chop it off thinking it didn't belong there.
Ken S