Page 1 of 1
Spare tire tailgate support
Posted: Thu Nov 05, 2015 3:27 pm
by aforests
Folks, wondering if someone would be kind enough to give me measurements of the tailgate supports for the spare tire on an M38. For some reason, bubba removed mine, so I need to manufacture one.
Posted: Thu Nov 05, 2015 5:10 pm
by 4x4M38
Aaron,
Using the photo, left to right:
1" 2" 1-7/8" 2" 1"
Height from tailgate: 3/4"
Total length: 13"
Material is probably 18 gauge, but 16 will work.
I can get you measurements for the three holes if you need them
but the one is centered with the right footman loop screw hole,
and the top two centered with the two top spare bracket
holes. They are square.
Take care,
Posted: Thu Nov 05, 2015 11:17 pm
by wesk
How's that!
Posted: Fri Nov 06, 2015 6:50 am
by 4x4M38
That's great Wes! Now we have it forever!
Posted: Tue Nov 10, 2015 11:27 am
by aforests
Thanks for the measurements guys!