M38A1 Fording valves identical?

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
jeeperjoe
Contributor
Contributor
Posts: 105
Joined: Thu Apr 18, 2013 6:00 pm

M38A1 Fording valves identical?

Post by jeeperjoe »

Does anyone know if the two fording valves used on the early M38A1 engine are both the same? My parts manual shows them in the illustrations but doesn't have them in the parts list! Picture of the upper valve here at Peter deBella's Jeep parts http://www.debellajeepparts.com/m38premier.htm.

I'm missing all of the fuel pump and related lines on the side of my engine since someone put in an electric FP. If anyone has any of the bits and pieces that you're willing to part with, please send me a message.
User avatar
4x4M38
Jeep Legend
Jeep Legend
Posts: 3487
Joined: Thu May 29, 2014 6:00 pm
Location: Texas Hill Country

Post by 4x4M38 »

Yes. 7410836.
2 each per ORD 9 SNL-G-758 September 1956.
User avatar
jeeperjoe
Contributor
Contributor
Posts: 105
Joined: Thu Apr 18, 2013 6:00 pm

Post by jeeperjoe »

Thanks. I actually just came here to answer my own question. Last night I found that the Engine and Clutch manual does say that they're the same. But FWIW my copy of the Ord 9 doesn't list the lower valve. IIRC it's a 1966 edition.
User avatar
wesk
Site Administrator
Site Administrator
Posts: 16465
Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:

Post by wesk »

Download our 1956 ORD 9 SNL G-758 which is a much more complete parts list. The 1959 & 1966 editions of the small Operators Organizational IPL TM 9-2320-208-20P is worthless.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
User avatar
jeeperjoe
Contributor
Contributor
Posts: 105
Joined: Thu Apr 18, 2013 6:00 pm

Post by jeeperjoe »

I already did. Thanks Wes.
Post Reply